During the week I’ve been busy planning the bathroom, it’s been quite the undertaking and has required a fair amount of research and comparison to what others have done and what we could do in the space allocated. After purchasing Gandalf and in our initial discussions over our plans we knew that we’d need to plan a space for a bathroom in. This was an important consideration for us as we hope to spend most of our time off grid…
Welcome to the pre-Christmas catch up! Unfortunately, not much work has been able to be done on the van over the past few months with everything going on. We do hope to get back out there soon and perhaps do a ‘lock in’ and work on the electrics inside. For now though, we do still have some updates! MOT Time… This month was rather tense with the build up to Gandalf’s MOT, he’s a 2009 van and with his noble…
Having chosen and installed the Truma heater and hot water system it was time to turn our attention to the storage and supply side of things. Heating Water Over the past few months we’ve been debating our options for water storage. We are at a point where this would now be a good task to get ticked off the list. We intend to travel for a while and are hoping to stay off grid for the most part, with that…
On a roll from yesterdays progress we headed out early to start day two of the bumper weekend. The Solution One of our big hopes this weekend was to install the shore power sockets on the van. Although we are not completing the rest of the electrical install just at the moment, we wanted to get the hole cut and fit the sockets ahead of time. I am mid-way through writing a fairly comprehensive guide to our electrics, which will…
Following on from a great couple of days progress with the van, we decided to tidy up the work we’d started on the solar cables. Day 3 In our post a few weeks ago, we had undertaken the massive job of re-wiring the larger solar panels. Unfortunately, at the time we’d not been able to post the cables back through the van due to the junction box that was in-situ being far too small and allowing only four cables to…
Yesterday’s hard work and the resulting success seemed to almost propel us forward with the remaining tasks planned for today. We were really hoping to be able to make a start on some of the internals, specifically the kitchen area. With the hob exhaust in place it was now time to implement an elegant solution for our fridge. Day 2 We’d been discussing with John for sometime how to go about creating a heavy duty sliding drawer for the fridge….
After a busy Christmas period for our business and some great family time, we decided to get back into the swing of van work with a cheeky session between Christmas and the New Year. Thanks to a number of days of hard work from myself, Ben and John, we’ve made another good step forward, managing to tackle one of the bigger jobs that had been looming over us. Day 1 We’d hoped to get the heater install finished up this…
Hello world! Welcome back to some updated van news. Let’s kick off with the kitchen. As mentioned previously the countertop had been sent off to be crafted by John, a neighbour of Ben’s parents. It’s now time to get the kitchen install underway! Fitting the countertop A quick update on our other progress before we get into the countertop. After finding and purchasing the sink and tap for the kitchen, and looking into various other parts of the build we…